I encounter this issue just now with AP-207
Here how I fix
1. erase first by pressing and hold hole at the bottom for 5s while plugging ethernet poe
2. follow this and set static ip and upload using latest firmware
https://acmxguy.wordpress.com/2020/05/06/aruba-iap-ap-boot-image-upgrade/
Original Message:
Sent: May 06, 2018 05:27 PM
From: Pooja Venkatesh
Subject: AP is not booting up properly
Error:
My AP is powering up but in the boot proccess I get the following error message and it doesn't do teh boot process correctly
Could anyone help me with the below error message. Wht does that mean ?
UBI error: ubi_read_volume_table: the layout volume was not found
UBI error: ubi_init: cannot attach mtd3
UBI error: ubi_init: UBI error: cannot initialize UBI, error -22
Volume aos0 not found!
Hit <Enter> to stop autoboot: 0
Booting OS partition 0
Checking image @ 0x0
Volume aos0 not found!
Invalid image format version: 0x0
Checking image @ 0x2000000
Volume aos1 not found!
data abort
AP- 300 series and only the Power LED is solid green
Tank u in advance
Regards,
Sandz