My AP is powering up but in the boot proccess I get the following error message and it doesn't do teh boot process correctlyCould anyone help me with the below error message. Wht does that mean ?
UBI error: ubi_read_volume_table: the layout volume was not foundUBI error: ubi_init: cannot attach mtd3UBI error: ubi_init: UBI error: cannot initialize UBI, error -22Volume aos0 not found!
Hit <Enter> to stop autoboot: 0Booting OS partition 0Checking image @ 0x0Volume aos0 not found!Invalid image format version: 0x0Checking image @ 0x2000000Volume aos1 not found!data abort
AP- 300 series and only the Power LED is solid green
Tank u in advance
Try rebooting the AP after a factory reset. It almost seems that you did a "reset" at the apboot menu and didn't reboot.
I tried it already by giving the command factory_reset and then boot. Got the same error message
What is the history of this access point?
This is a new AP. Did a factory reset and tried to boot and got error messages.
Please contact TAC so that they can Diagnose/RMA it. You can contact them here: http://www.arubanetworks.com/support-services/contact-support/
Here how I fix
1. erase first by pressing and hold hole at the bottom for 5s while plugging ethernet poe
2. follow this and set static ip and upload using latest firmware
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.