ProCurve Switch 8212zl(config)# services <slot> boot serviceAfter that you should see the following prompt
SvcOS Login:Please enter the user name diagnostics here and press Enter. You will be presented with the following menu:
SvcOS Login: diagnostics
Select 1-6> 5
This will replace the existing software image on the disk with
the factory image. Afterwards you will need to upgrade to
your desired version and reload your config.
Continue (y/n)? y
This will take a few minutes
Exit and reboot will take several minutes. Continue (y/n)? yAfter the module reboots please test if you are able to boot the productOS.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.