Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

MSM 775 hdd OS

This thread has been viewed 7 times
  • 1.  MSM 775 hdd OS

    Posted Apr 28, 2022 02:39 PM

    I have a problem with HDD of a MSM775 controller.

    I received a new one from HP but there is no OS on the HDD so i can't boot in Product os. Still have the No boot device message on serial view.

    Can someone help me please ?

    richard conquet

  • 2.  RE: MSM 775 hdd OS

    Posted Apr 29, 2022 01:38 AM
    Could you please try the following:

    Boot to the serviceOS of the module using the following command on the switch

    ProCurve Switch 8212zl(config)# services <slot> boot service

    After that you should see the following prompt

    SvcOS Login:

    Please enter the user name diagnostics here and press Enter. You will be presented with the following menu:

        SvcOS Login: diagnostics




        Controller Diagnostics


    1. Exit and reboot
    2. Show hardware information
    3. Show health status
    4. Run disk diagnostics
    5. Restore factory image to disk
    6. Power off controller

        Select 1-6>

    Please select Option 5 - Restore Factory Image to Disk


        Select 1-6> 5

        This will replace the existing software image on the disk with

        the factory image.  Afterwards you will need to upgrade to

        your desired version and reload your config.

        Continue (y/n)? y

        This will take a few minutes


        Exit and reboot will take several minutes.  Continue (y/n)? y

    After the module reboots please test if you are able to boot the productOS.

    ProCurve Switch 8212zl(config)# services <slot> boot product

    Emil Gogushev