Wireless Access

 View Only
last person joined: 6 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

How to check if AP is Instance AP??

This thread has been viewed 11 times
  • 1.  How to check if AP is Instance AP??

    Posted May 17, 2022 04:11 AM
    I accessed the AP-635 model from the console.

    How do I check if this is an Instance AP?

    The AP does not emit a SetMeUp SSID, so verification is required.

    ------------------------------
    YongHun Lee
    ------------------------------


  • 2.  RE: How to check if AP is Instance AP??

    EMPLOYEE
    Posted May 17, 2022 07:52 AM
    What version of OS is it running?

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    HPE Design and Deploy Guides: https://community.arubanetworks.com/support/migrated-knowledge-base?attachments=&communitykey=dcc83c62-1a3a-4dd8-94dc-92968ea6fff1&pageindex=0&pagesize=12&search=&sort=most_recent&viewtype=card
    ------------------------------



  • 3.  RE: How to check if AP is Instance AP??

    MVP EXPERT
    Posted May 17, 2022 09:28 AM
    I’m sure there are better ways of doing it but the following should work

    1).if the AP is authenticating when connecting to the net via ClearPass, ClearPass should tell you its an instant AP from its fingerprint
    2) if connected to a 2930 and you have device fingerprinting enable, the lldp collector will tell you exactly what it is

    A




  • 4.  RE: How to check if AP is Instance AP??

    Posted May 17, 2022 01:01 PM
    Log in to the AP and check its working mode on the web platform. Connect a PC to the AP using an Ethernet cable. Enter the AP's IP address in the browser. The AP's working mode is automatically displayed on the login page.

    ------------------------------
    Jonathan T. Rivera
    ------------------------------