I've been looking for a guide or instructions to help with moving from a single physical controller to a pair of physical controllers with a virtual mobility conductor. I've seen an older lab guide for setting up a conductor and cluster from scratch, but can't seem to find discussions or a guide on this particular scenario. Here is a rough outline of what I think needs to happen:
1. Deploy new virtual mobility conductor
2. Reissue existing AP, PEF, RFP licenses for the conductor (I believe this will NOT affect the existing licenses on the working controller?)
3. Rebuild wireless config on the conductor - SSIDs, AP groups, roles, PEF rules, VLANs, etc.
4. Bring the new physical controller online under the conductor, set up its connection to ClearPass, guest portal IP (non CPPM-Guest, using local portal)
5. Test some APs on the new controller and config, associate them via DHCP options (assuming setup of a cluster for controllers with a virtual IP out front)
6. Wipe and bring the old physical controller online under the conductor, set up its connection to ClearPass, its guest portal IP, etc.
7. Move all other APs onto the new cluster of two controllers
Does this make sense? What am I missing? Better yet, can anyone point to a guide or similar? Thanks!