You would want to edit the AP (At the appropriate folder level) with the "ap-name <ap-name>". See example below. This is me assigning radio profiles to just this AP:
ap-name "MILLER-101-AP1"
dot11a-radio-profile "5GHz 22db"
dot11g-radio-profile "2.4Ghz 15db"
In the radio profile you can set this for example:
rf dot11g-radio-profile "2.4Ghz Off"
no radio-enable
or to change it to an airmonitor instead of off set "mode am-mode"
------------------------------
Dustin Burns
Lead Mobility Engineer @WEI
ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
If my post was useful accept solution and/or give kudos
------------------------------
Original Message:
Sent: Jan 10, 2022 04:25 PM
From: Guram Mazmishvili
Subject: Per-AP radio profile override on mobility master Deployment
Hello
I have a Mobility master with two cluster controllers.
I have an AP group where I deploy radio "a" and "g" profiles.
I have a problem with deploying profiles at individual AP, for example, I want to disable 2.4 radio on some APs.
I tried on CLI to configure individual AP with a different profile but with no success.
I hope you can help to find out what is the best practice with my situation.
AOS Version 8.7.0.0
Thanks.
------------------------------
Guram Mazmishvili
------------------------------