for 1, you can look to use blacklist on ACL
for 2, you need to enable log on your acl
------------------------------
PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...
PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)
PowerArubaCL: Powershell Module to use Aruba Central
PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..
ACEP / ACMX #107 / ACDX #1281
------------------------------
Original Message:
Sent: Nov 16, 2021 05:20 PM
From: amr shawky
Subject: Mobility Controller- SSID requremnets
hello
we have MM-MC soultion
SSID - (Guest-HQ)
the requrimnets are :-
1- When client try to access server 10.1.1.1 isolated him for 1800sec
2-When client access 10.1.1.1 controller must generate syslog message and send to ip 10.1.1.5(server-syslog)
3-Gateway is 192.168.5.4 if client get the Gatawy ip (192.168.5.4) so he willnot appeared under user-table
How to achive that
------------------------------
amr shawky
------------------------------