Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

upgrading mobility controller 7010 from 8.3 to 8.6?

This thread has been viewed 23 times

  • 1.  upgrading mobility controller 7010 from 8.3 to 8.6?

    Posted May 26, 2021 07:01 PM
    i tried to upgrade from 8.3 to 8.6.0.9 but after restarting i couldnt open the GUI and the ssh kept disconnecting. is there a certain upgrade path from 8.3 to 8.6?

    ------------------------------
    basel zind
    ------------------------------


  • 2.  RE: upgrading mobility controller 7010 from 8.3 to 8.6?

    EMPLOYEE
    Posted May 28, 2021 08:50 AM
    Check the Release Notes for guidance. Doesn't look like you need to have an intermediate upgrade, check the section on memory requirement more thoroughly.

    Do you still have access to the (serial) console?

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message