Wireless Access

 View Only
last person joined: 20 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

WLC Additional license loading

This thread has been viewed 9 times
  • 1.  WLC Additional license loading

    Posted Nov 10, 2021 04:07 PM

    Can anyone guide me through  loading these licenses? first time managing aruba wlc.
    Aruba Cntrlr Per AP PEF Lic E-LTU
    Aruba Cntrlr Per AP RFProtect Lic E-LTU

    Adorico iii Suizo

  • 2.  RE: WLC Additional license loading

    Posted Nov 11, 2021 03:27 AM

    you need to activate that licenses in aruba license management system : https://lms.arubanetworks.com/licenses , after you will see generated license key.  copy it.

    then go to controller, licenses menu and in inventory add click add license button, paste that copied key there. thats all :)

    Temur Kalandia

  • 3.  RE: WLC Additional license loading

    Posted Nov 11, 2021 04:52 AM
    Please note that you will need "Aruba LIC-AP Controller per AP Capacity License E-LTU" as well.. the mentioned licenses are 'add on' to the LIC-AP.

    When you received the licenses, there should be an instruction with it, and your Aruba partner can probably help you activate and install licenses if you can't find out yourself how to do it. Also Aruba Support can assist in getting the licenses activated or installed if you get stuck. As mentioned before, it is not too hard if you follow the steps.

    Herman Robers
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.