Please note that you will need "Aruba LIC-AP Controller per AP Capacity License E-LTU" as well.. the mentioned licenses are 'add on' to the LIC-AP.
When you received the licenses, there should be an instruction with it, and your Aruba partner can probably help you activate and install licenses if you can't find out yourself how to do it. Also Aruba Support can assist in getting the licenses activated or installed if you get stuck. As mentioned before, it is not too hard if you follow the steps.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Nov 09, 2021 09:37 PM
From: Adorico iii Suizo
Subject: WLC Additional license loading
Hi,
Can anyone guide me through loading these licenses? first time managing aruba wlc.
Aruba Cntrlr Per AP PEF Lic E-LTU
Aruba Cntrlr Per AP RFProtect Lic E-LTU
------------------------------
Adorico iii Suizo
------------------------------