Hello
I want to know how to configure the GRE tunnel on the mobility controller to connect with IAP.
I cannot find documentation on how to setup the GRE tunnel on the controller side.
On IAP (VC) side , I configure
Plus>Vpn>Protocole : "Aruba GRE" and <IP_Mobility_Controller> as Principal Host.
At the moment, , the log on the Mobility-Ctrl says:
"Oct 14 16:32:29 authmgr[6105]: <522275> <6105> <WARN> |authmgr| User Authentication failed. username=20:4c:03:0d:d9:30 userip=10.35.124.166 usermac=20:4c:03:0d:d9:30 authmethod=VPN servername=Internal serverip=10.35.125.33 apname=N/A bssid=00:00:00:00:00:00
Oct 14 16:32:29 localdb[6190]: <133006> <6190> <ERRS> |localdb| User 20:4c:03:0d:d9:30 Failed Authentication (Processing USER_QUERY on DBType(13))
Oct 14 16:32:29 localdb[6190]: <133121> <6190> <WARN> |localdb| make_response: Sending USERDB_REJ-msg to 127.0.0.1:8214 with msgtype:23 id:62 reqtype:6 dbtype:13"
The mac-add is the Mac-address of my IAP.
I tried allreaddy to add the Mac in the AP whitelist., .
Also I tried to add a user with the command:
" (MC-VA-01) [mynode] #local-userdb add username 20:4c:03:0d:d9:30 password 20:4c:03:0d:d9:30"
For info:
I Use IAP 205H vers 6.4.4.8
And Mob ctrl ( Virtual : 8.3.0.3
Michel
------------------------------
Michel Misonne
------------------------------