There is an issue here, though. If the setting is inherited from another profile, the GUI shows the original value for the AP system or wired port profile (this may well be true for other settings) as a blank drop-down box. It is not possible to reset this. Even if you select the same value that is being inherited, it still remains as an AP override.
The only way I could remove the override is to use the CLI and delete the config lines.
------------------------------
David Rickard
------------------------------
Original Message:
Sent: Oct 12, 2021 11:56 AM
From: Colin Joseph
Subject: ArubaOS Per AP Override
FYI - the override is tied to the ap-name. If you name the AP the same thing as before, it will obtain those settings again.
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
Original Message:
Sent: Oct 12, 2021 11:45 AM
From: Diego Joubert
Subject: ArubaOS Per AP Override
I didn't found a way to remove the PER-AP-OVERRIDE.
Workaround: Factory reset the AP manually.
Thanks anyways
------------------------------
Diego Joubert
Original Message:
Sent: Oct 11, 2021 09:28 PM
From: Colin Joseph
Subject: ArubaOS Per AP Override
click on the name of the AP with the override. A list of profiles will show up below it. Expand the profiles to see if there is any configuration. Remove any configurations (the per AP exceptions) to remove the override(s).
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
Original Message:
Sent: Oct 11, 2021 09:11 PM
From: Diego Joubert
Subject: ArubaOS Per AP Override
Hi,
I want to know how to disable Per-AP-Override on an AP. I cannot remember what I did with that AP and want to revert it back to normal like all members of the group. I even managed to move the AP from group to group but obviously It didn't work.
------------------------------
Diego Joubert
------------------------------