Wireless Access

 View Only
last person joined: 2 days ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Mobility Master does not show correct Flags

This thread has been viewed 10 times
  • 1.  Mobility Master does not show correct Flags

    Posted Dec 29, 2021 02:07 AM
    Hi,

    I have a  problem;

    from MM
    #show ap database long 
    Name Group AP Type IP Address Status Flags Switch IP Standby IP Wired MAC Address Serial # Port FQLN Outer IP User
    ---- ----- ------- ---------- ------ ----- --------- ---------- ----------------- -------- ---- ---- -------- ----
    AP1 APS 515 10.1.1.164 Up 45m:47s r 10.1.90.1 10.1.90.2 e8:26:89:ca:c3:a8 CNK9KD5CZ6 N/A N/A

    from Switch:

    #show ap database long 
    Name Group AP Type IP Address Status Flags Switch IP Standby IP Wired MAC Address Serial # Port FQLN Outer IP User
    ---- ----- ------- ---------- ------ ----- --------- ---------- ----------------- -------- ---- ---- -------- ----
    AP1 APS 515 10.1.1.164 Up 55m:30s rIf 10.1.90.1 10.1.90.2 e8:26:89:ca:c3:a8 CNK9KD5CZ6 N/A N/A N/A




    There is a difference between flags:

    Switch and MM are on the same version;

    show version

    Aruba Operating System Software.
    ArubaOS (MODEL: Aruba7240XM), Version 8.6.0.15
    Website: http://www.arubanetworks.com
    (c) Copyright 2021 Hewlett Packard Enterprise Development LP.
    Compiled on 2021-10-21 at 21:47:14 UTC (build 81969) by p4build

    ROM: System Bootstrap, Version CPBoot 1.2.9.0 (build 56553)
    Built: 2016-09-22 04:51:38
    Built by: p4build@re_client_56553


    Switch uptime is 4 days 23 hours 11 minutes 50 seconds
    Reboot Cause: Master Initiated Reboot (Intent:cause:register 59:86:50:2)
    Supervisor Card
    Processor (XLP432 Rev B2 (Secure Boot) , 1500 MHz) with 15554M bytes of memory.
    32K bytes of non-volatile configuration memory.
    15488M bytes of Supervisor Card system flash.


    What could be the problem?

    By the way, we have been using this information for nagios process. We get "show ap database long" command output through API as json and if flags has "I" switch we labeled it as "not working".



    ------------------------------
    husnu demir
    ------------------------------


  • 2.  RE: Mobility Master does not show correct Flags

    MVP GURU
    Posted Jan 04, 2022 04:38 PM
    You have the same issue for all AP ?

    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCL: Powershell Module to use Aruba Central

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------



  • 3.  RE: Mobility Master does not show correct Flags

    Posted Jan 05, 2022 03:12 AM
    We have solved the I (Inactive) flag (Procurve problem) by changing LLLDP properties. But Mobility Master is not showing the flags correctly.

    ------------------------------
    husnu demir
    ------------------------------