Wireless Access

 View Only
last person joined: 10 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

AP is in group but has zero WLan's

This thread has been viewed 25 times

  • 1.  AP is in group but has zero WLan's

    Posted Apr 09, 2021 02:18 PM
    Hello,

    Looking for advice on some AP-515's. They discover the MM just fine. We drop them in the proper group which has other AP's working nicely.
    The AP appears to provision but never starts  broadcasting wlan's. No Flags to be seen. On the AP status page you can see it has no Wlans. Any ideas? Thanks

    ------------------------------
    Ryan Hertzing
    ------------------------------


  • 2.  RE: AP is in group but has zero WLan's

    EMPLOYEE
    Posted Apr 09, 2021 02:47 PM
    show ap config ap-name <name of ap>

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------

    Original Message


  • 3.  RE: AP is in group but has zero WLan's

    EMPLOYEE
    Posted Apr 12, 2021 07:54 AM
    Make sure your controller (MD) firmware version and/or DRT version is recent enough to have the AP-515 supported in your country domain. If you are on recent firmware, this should not be an issue.

    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------

    Original Message