Dear Arubers,Even I understood "L2-Connected" principle, I need to validate a temporary configuration.On "Cluster profile" I can select which VLANs I want to share on the cluster. If I add VLANs only on a some controllers and not on the whole cluster, is it possible to maintain a full redundancy for clients ?Below you can find the network diagram for this temporary step of migration.
Here, I delete VLAN 12 and 13 of the MD3 and MD4. If a client is connected on an AP registered on MD3, can he nevertheless connect to the VLAN 12 ?It would mean that the AP would have AAC/S-AAC and the client would have other UAC/S-UAC. Is this configuration possible (without "L2-Connected" of course) ?Thanks a lot for your help.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.