Wireless Access

 View Only
last person joined: 17 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

AP515 / Procurve 5406zl POE

This thread has been viewed 10 times
  • 1.  AP515 / Procurve 5406zl POE

    Posted Nov 09, 2021 11:17 AM
    I'm running a network of all HP Procurve 5406 / 5412zl switches.  Each of them is loaded with HP J9306A 1500 watt POE+ power supplies.  I am running :

    (2) 7210 Controllers (AOS 8.5)
    (1) Mobility Master ( AOS 8.5)

    We have a mix of 200 series / 300 Series / 500 Series AP's 

    Since deploying the 500 series (AP515) we are having some intermittent WiFi issues that i'm troubleshooting.  I am wondering if it is possibly a POE issue.  

    I think step 1 is - i need to apply IPM to my environment.  Does anyone have any documentation on how to do so?

    Also, what troubleshooting steps could i take to uncover if i have a POE problem?

    Michael Robertson

  • 2.  RE: AP515 / Procurve 5406zl POE

    Posted Nov 09, 2021 04:16 PM
    here is the user guide that talks about it

    its a setting under AP System Profile.
    you can use this show commands to see the usage of an AP.
    #show power-mgmt-statistic ap-name <blah>


    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.