Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

AP22 localy setup

This thread has been viewed 7 times
  • 1.  AP22 localy setup

    Posted Jan 05, 2022 09:59 AM


    I want to setup and manage directly an ap22 without pass by Aruba Instant On. When I go in http on  the ap22 with its address i can change only the ip address dynamic to static, the vlan and that s all. I can see on the chrome  browseran authentication page is displayed quickly then disappears with a redirection on port 8081 or some information is displayed and or I cannot configure much except the static ip address.
    It is possible like an 1930 switch to configure an ap22 localy ?

    Hache Esse

  • 2.  RE: AP22 localy setup

    Posted Jan 05, 2022 06:18 PM
    Far as i known the Aruba InstantON AP22 is a cloud managed access point and can't be only managed through the cloud portal. Not locally.

    Ps. note that Aruba InstantON have there own community page which is the right place to ask this questions.

    Marcel Koedijk | MVP Guru 2021 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own

  • 3.  RE: AP22 localy setup

    Posted Jan 07, 2022 02:59 AM
    Ok, thank you for the response.

    Hache Esse