Hello ! I have configured a cluster with two HW-MM-5K and four controllers (7220 and 7240).Yesterday, I decided to switch VRRP master on Mobility Conductors and since then I can't join them with SSH/HTTPS from remote network.Second member was reachable but I rebooted it thinking it could be a VRRP issue. Now, it is unreachable too.ICMP is still OK and SSHd service is still up because I can reach them from other controllers on the same network.Do you have ever seen same issue with remote access ?We have verified the whole architecture, routing protocols are OK and there are not any firewall equipements between PC with SSH client and Mobility-conductor : SSH access is possible only on the same network.
Can be that there is a problem with a change done before the reboot but I don't remember of anything new big.I read issues with "trusted" state on interfaces so I verified it. I verified firewall-cp state too. Nothing to report !Do you know some verifications to do ?Thanks for your help.
Dear Herman, I tried your workaround, added « trusted vlan » on port-channel 0 interface and now I can reach the two Mobility Conductors.Even I don't understand why this issue appeared suddenly, I thanks you for this idea !
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.