Wireless Access

 View Only
last person joined: 3 days ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Active APs vs installed license

This thread has been viewed 8 times
  • 1.  Active APs vs installed license

    Posted Jan 10, 2022 09:55 AM
    Dear Experts, 

    One of the customer is running 19 Active APs but they have only 16 licenses installed on a 7010 controller running 8.7.1.1.

    How is this possible? snapshots are attached

    ------------------------------
    owais
    ------------------------------


  • 2.  RE: Active APs vs installed license

    MVP EXPERT
    Posted Jan 10, 2022 01:30 PM
    More then once the GUI lies a bit. What is the CLI output telling you?
    "show ap active" 
    "show licence summary"

    ------------------------------
    Marcel Koedijk | MVP Guru 2021 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opinions are my own
    ------------------------------



  • 3.  RE: Active APs vs installed license

    Posted Jan 10, 2022 01:44 PM
    Hi, 

    No there are 19 active APs as you can see from attached snap







  • 4.  RE: Active APs vs installed license

    MVP GURU
    Posted Jan 10, 2022 02:19 PM
    Can you share the output of the CLI commands though..

    ------------------------------
    Dustin Burns
    Lead Mobility Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------