Wireless Access

 View Only
last person joined: 3 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

IAP 515, error with virtual contolleur

This thread has been viewed 18 times

  • 1.  IAP 515, error with virtual contolleur

    Posted Apr 20, 2021 01:55 AM
    Hi,

    I have 10 IAP 515 and one NPS Windows (2016), EAP-TLS

    I got this error message "A RADIUS message was received from the
    invalid RADIUS client IP address xxx.xxx.xxx.xxx" on NPS on Windows, if i use ip of virtual controlleur.
    I think this is from the virtual controller but I don't understand why

    Any idea on how to fix it?
    Thanks a lot
    Best regards

    ------------------------------
    lapillo kevin
    ------------------------------


  • 2.  RE: IAP 515, error with virtual contolleur

    Posted Apr 20, 2021 02:29 AM
    I was found ....

    Proxy radius was not active



    ------------------------------
    lapillo kevin
    ------------------------------

    Original Message


  • 3.  RE: IAP 515, error with virtual contolleur

    EMPLOYEE
    Posted Apr 20, 2021 02:30 AM
    you need to enable the "Dynamic RADIUS proxy" which is under system setting


    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------

    Original Message


  • 4.  RE: IAP 515, error with virtual contolleur

    Posted Apr 20, 2021 02:35 AM
    thank you very much
    This works
    sorry for the inconvenience

    ------------------------------
    lapillo kevin
    ------------------------------

    Original Message