Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Expand all | Collapse all

AP-207 Series

This thread has been viewed 28 times
  • 1.  AP-207 Series

    Posted Sep 07, 2021 10:17 AM
    Hi,
    \
    In my company, we have around 20 AP207 (JX952A). How do I do to use them with Aruba Instant mode as IAP207 (JX955A)?

    ------------------------------
    Tuan Vu Vu
    ------------------------------


  • 2.  RE: AP-207 Series

    MVP EXPERT
    Posted Sep 07, 2021 10:17 AM
    If these are AP-207 as opposed to IAP-207 you would need a Mobility Controller as these do not support the Instant mode.

    ------------------------------
    Craig Syme
    ------------------------------



  • 3.  RE: AP-207 Series

    Posted Sep 07, 2021 10:20 AM
    Yes, those are not Instant AP's and will not work without a controller.

    --





  • 4.  RE: AP-207 Series

    Posted Sep 07, 2021 09:44 PM
    Can we upgrade firmware for devices from AP to IAP?

    ------------------------------
    Tuan Vu Vu
    ------------------------------



  • 5.  RE: AP-207 Series

    EMPLOYEE
    Posted Sep 07, 2021 10:49 PM
    no not for those APs.
    The later AP models like AP5XX do run unified image in which you can move between controller based and Instant images

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------



  • 6.  RE: AP-207 Series

    Posted Sep 07, 2021 11:07 PM
    Thank a lot!

    ------------------------------
    Tuan Vu Vu
    ------------------------------