again look at my screenshots, you should see the username in your case operator19 in the clients section and CLI, if you are authenticating the user.
in your screenshot of the CLI, none of the users are in "Guest" role which indicates that they are not using the captive portal.
in my case the guest-test SSID is of type Guest
and it is using internal authenticated splash page.
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
------------------------------
Original Message:
Sent: Nov 25, 2021 02:18 AM
From: Juan Gutiérrez Asensio
Subject: Aruba Instant AP 315 show connected usernames to local CP
Hello, the list of users on the Web UI won't tell if that user is actually logged in at a given moment, which is the information I want.
On the other hand using the CLI # show clients won't return the users of the local Data Base but the name given by the endpoint user-agent:
In some cases the client's user agent will return the user of the local CP Data Base, but in most cases it will not. Just the device model. I need to correlate that information to the actual user of the CP Data Base which is logged in the wireless guest network at a given moment.
Thanks in advance.
------------------------------
Juan Gutiérrez Asensio
Original Message:
Sent: Nov 24, 2021 04:45 PM
From: Ariya Parsamanesh
Subject: Aruba Instant AP 315 show connected usernames to local CP
you should see the username displayed in Web UI and the CLI (show clients) if the users are authenticated with the local/external database either for dot1x/Guest captive portal
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
Original Message:
Sent: Nov 24, 2021 05:48 AM
From: Juan Gutiérrez Asensio
Subject: Aruba Instant AP 315 show connected usernames to local CP
Hello,
In our enterprise we provide guest Internet access throgh several Aruba IAP 315 APs with a local captive portal. When I log into the APs and issue this command on the cli:
# show clients debug ----> I can only see the MACs of the devices and the hostname sent by the endpoint.
I need to know which users are connected at a given moment among the users displayed by # show users command. Is there a way to know such information ?
Thanks,
Juan.
------------------------------
Juan Gutiérrez Asensio
------------------------------