Hello,so I have an Airwave setup on my server with several Aruba switches added. There was absolutely no problem with adding them.
As I wanted to add the only two HP switches we have (J9983A) I've run into some difficulties.On my switch side the SNMP protocol is enabled with community string added, firmware is the latest one as I updated it yesterday.In Airwave I added the HP switch under "Device setup" > "Add" as a HPE OfficeConnect Switch with every possible credential filled in. If I understand correctly, Community string is the same thing as a Community name in HP GUI. Also is the SSH/Telnet option the same as my login credentials to HP switch GUI?Now, the switch is showing up down with an error fetching current configuration.I was wondering if the problem is in my switch setup or if i'm just adding it as a wrong device?In the HP GUI the only two SNMP options are enabling the protocol or changing the Community name. Is there a way to change the protocol version etc. since Airwave only support SNMP v2c?Thank you for any advice.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.