Hi Gurus ,
We have deployed 7 IAP,s in one of our new branch , We have connected a POE switch for the connectvity and have terminated the ADSL line in that switch . Only 1 vlan have been created which is been used for this task only , and DHCP is configured . Now we are facing an issue , whenever the connected user,s number is increasing ( suppose more than 30 ) the next users are not able to connect to the WIFI . I assume it could be a dhcp pool issue ,Could you please suggest what could be the problem and appreciate if you could share some suggestions as per your vast experience and knowledge .
Thanks and Regards ,
SSH into the Virtual Controller and execute "show aps". That is a good starting point.
Hi Cjoesph ,
Thanks a lot for your guide line , you are always there to help and i really appreciate that . I have found the sloution and RCA for this issue . Actually the ISP router was having DHCP limitation. On Linksys router the max DHCP users limit was set to 50 , i have changed it to 200 and things have started working fine .
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.