Mobility Master design
Can you clone an AP group?
Can you rename an AP group?
You cannot rename an ap group. You can clone it, however.
ap-group <new name>
clone <old name>
Thanks for the quick responses guys!
AP-Renaming - X
How do you clone an AP Group via CLI on the MM at the hierarchial scale of lets say
/md/Super-Corp (AP Group resides here)
If I go to the MCs themselves I can see the ap-groups
logon switch x
ap-group <new group>
clone <existing group>
write mem - pushes config to mds
Or if you are askign to clone it from /md/Super-Corp to /md; that is not possible.
Thanks that did the trick!
I was thrown off by the fact I cant see the running config of the specific group even if you change the directory to the group
show ap-group - not allowed command.
show run - shows same running config as MM
show run | inc ap-group
default ap groups shown.
You should use the command:
show configuration effective
that will show the configuration from that level
"Submit As" which I think should be a clone, does nto seem to be working for me.
Through CLI however the clone options still works flawless (ie. ap-group <new-group> clone <old-group>) so that is what I've been using.
Renaming pretty much anything is not possible with Aruba controllers. AP-group cannot be renamed.
Remember that if you're using cloning to try and rename an ap-group, this will not change for your AP's so you will have to move them into the new group which requires the AP to reboot.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.