what switch firmware are you running at?
https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/EntryId/10226/Default.aspx Backup the Flash File System in the CLI(host) #backup flash(host) #copy flash: flashbackup.tar.gz tftp: <tftphost> <destfilename>(host) #copy flash: flashbackup.tar.gz ftp: <ftphost> <username> <destfilename>(host) #copy flash: flashbackup.tar.gz scp: <scphost> <username> <destfilename>(host) #copy flash: flashbackup.tar.gz usb: <destfilename>Restore the Flash File System in the WebUI1. Navigate to the Maintenance > Copy Files page.2. For Source Selection, specify the server to which the flashbackup.tar.gz file was previously copied.3. For Destination Selection, select Flash File System.4. Click Apply.
it is for MAS switch
for Aruba OS Switch, you can use
copy run tftp://X.X.X.X/myconfig.cfg
On ArubaOS-Switch (formerly Provision switches)
From the CLI; capture a show run to a text file and save it.
From the Web GUI. Select Configurations> Management. In the right side, in the Download box, Click Download and save the file locally. It will default to config.pcc. PCC files can be opened with notepad or similar.
BTW, if you are using the Traditional web GUI instead of the Improved GUI, expand System and click on Updates/Downloads. Highlight the config file in the left side, then click on Download in the Configuration file section to store the config.pcc file locally.
I saw the Configurations> Management option to download, but wasn't sure if that was it.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.