Ok, thought this was an easy question but having trouble finding answer on internet and from support. Currently we are using a multimode patch cable from 0/0/0 to core switch. We are migrating to a new core switch and wondered do I have to stay multi-mode or can I use single mode since I have plenty of fiber patch cables and GBICS. Not sure the GBIC in the controller is MM or SM or both.
Found white paper finally. Thanks!
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.