Wireless Access

last person joined: 4 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

New APIN303 is not appearing in AOS 8.6.0.2

  • 1.  New APIN303 is not appearing in AOS 8.6.0.2

    Posted Jul 15, 2020 06:43 AM

    Dear all 

     We have controller Aruba7210 with AOS 8.6.0.2, we have installed few APIN303 APs but all are not appearing in controller. I have checked all Aps are getting dhcp and even there are enough licenses. But these APs are not appearing in Controller. I will be very grateful if I 'll get help. 

    Thanks & Regards 

     

     



  • 2.  RE: New APIN303 is not appearing in AOS 8.6.0.2

    Posted Jul 15, 2020 06:48 AM

    On the commandline of the controller, type "show ap database" to see if those access points show up with flags.



  • 3.  RE: New APIN303 is not appearing in AOS 8.6.0.2

    Posted Jul 15, 2020 07:26 AM

    Dear, I have checked and didn't find that Aps in ap database also. 

     

     



  • 4.  RE: New APIN303 is not appearing in AOS 8.6.0.2

    Posted Jul 15, 2020 07:34 AM

    Do you have your Master Discovery options set (e.g DHCP 43/60 or aruba-master DNS record), have you also checked Control Plane Security as well has not denied the AP?



  • 5.  RE: New APIN303 is not appearing in AOS 8.6.0.2

    Posted Jul 19, 2020 02:07 AM

    Dear Please have a  look into below configuration in control plane control plane security.jpg

    Secondly APs are getting IPs from HP core switch as DHCP pool is created in core switch. 

    omarrsd_0-1595139879217.png

     

     

     



  • 6.  RE: New APIN303 is not appearing in AOS 8.6.0.2

    Posted Jul 19, 2020 06:53 AM

    What method are you using for APS to discover the controller?



  • 7.  RE: New APIN303 is not appearing in AOS 8.6.0.2

    Posted Jul 23, 2020 03:52 AM

    I just did work around and found the solution. I just connected another new AP303 out of my network and login to AP303 and found all others Aps were appearing also. I converted them Manually to AP mode. 

    After that found all APs in controller. I have no idea what was logic behind this. APIN303 APs are Unified APS