Does airgroup only work on the IAP-105's when the VC/IAP is handling the VLANS itself?
If a VLAN is set as static and network assigned, then will Airgroup not work?
OK so I have Arigroup enabled and also guest bonjour multicast.
I can see apple TV's and epson printer and Denon amplifier on the Airgroup servers, but on iphone/ipad I only see the Denon Amplifier visable on Airplay devices!
Now I can see some Apple TV's. But not all, the Cache looks OK on AirGroup servers page?!
Are the clients in the same subnet as the airgroup devices or a different subnet?
Are the subnets separated by a NAT boundary?
Clients were a mix, one SSID is on the same VLAN as the Apple TV's the other 3 on seperate VLANs, but they are not NAT as there is a L2 switch handling the routing and VLANS.
In the end with the help of Aruba I managed to get all the 8 apple TV's showing on the airplay of the device, this was achiveved with a firmware downgrade. I am still yet to test the airplay fully and see if its usable and quick.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.