Wireless Access

last person joined: 3 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

Ap 105

Jump to Best Answer
This thread has been viewed 1 times
  • 1.  Ap 105

    Posted Jan 31, 2013 05:57 PM

    Hi I have an AP 105 trying to add it to the network we use an aruba controller 3200 XM. I plugged the network cable into the console port the power light flashes green slowly and the Enet light blinks amber about every 2 seconds. The AP shows up in the controller at least its MAC address does and thats it.


    #3200


  • 2.  RE: Ap 105

    Posted Jan 31, 2013 06:06 PM

    Is that the first AP105?

     

    On the commandline of the controller, type "show ap database" to see if you can see the access point.

     



  • 3.  RE: Ap 105

    Posted Jan 31, 2013 06:09 PM

    No we have 21 AP's on the network all of them are IAP's this will be the first non IAP on the network. Not sure about the cmd line i'm using the web gui. In there is does show the MAC address.



  • 4.  RE: Ap 105

    Posted Jan 31, 2013 06:14 PM

    Can you send a screenshot of what you are seeing?

     

     



  • 5.  RE: Ap 105

    Posted Jan 31, 2013 06:19 PM

    Sure the top one is it.Aruba screen.jpg



  • 6.  RE: Ap 105

    Posted Jan 31, 2013 06:20 PM

    Looks like there are no radios up on that (no channel).  Did you do any device-specific configuration for that AP?

     



  • 7.  RE: Ap 105

    Posted Feb 01, 2013 09:54 AM

    Did you do any device-specific configuration for that AP?

     

    Not sure what you mean by this.



  • 8.  RE: Ap 105

    Posted Feb 01, 2013 10:07 AM

    Please open a support case to see why it is not broadcasting.

     



  • 9.  RE: Ap 105
    Best Answer

    Posted Feb 01, 2013 10:11 AM

    Ok I connected to the ENET port instead of the console port and all is good thank you for all your help.