Does anyone have some results of running the perf-test command on a 3200XM controller between controller and an iperf server which is connected to the controller via wire? Although gigabitethernet interfaces I can only reach up to 220 Mbits/sec.
I also connected a laptop running an iperf server directly to one of the interfaces of the controller and get the same results.
The controller is running on ArubaOS 184.108.40.206
Isn't that way too low?
What is your exact setup?
Exactly what command did you use for iperf?
What were the platforms used at both end of the iperf?
The controller is running as a master and currently serving only 3 APs (AP-105, AP-134, AP-135).
I start Iperf with the options "-s -w 512K -i 1" on a machine running Windows 8 or a Macbook with OS X 10.10, both directly connected to the controller.
On the controller I used the following command: perf-test client start controller host x.x.x.x tcp window 512K
You have quite a few variables at play here. Please open a TAC case. They might want to replicate after looking at your logs.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2020 Hewlett Packard Enterprise Development LPAll Rights Reserved.