Hi Airheads ,
I would like to to get some info or advises from pepole that already deployed IAP/274/275 solutions at sea ports in order to connect 3rd part vendor ap-client. (that doing NAT to devices behind him)
Anything i need to know ? Any tips ?
Client would like to use 5Ghz.... (Isn't it a problem with weather radars or sea radars?)
I have supported a few marinas where they deployed AP-275s along the pier to allow their clients to use when on a boat, or to connect CPE types of devices to the AP-275. So long as you are using a crypto that the CPE devices will support, you should be fine. In most cases WPA2-PSK is perfectly acceptable.
Are there any special requirments some places might require class1/div2 certified AP's. Are these 274's and 275's certified for my reference?
C1D1 and C1D2 or ATEX are usually for explosive environments where there are combustible or harmful/corrosive vapors in the air (which should NOT EVER be the case in and around a shipping area or a pier).
If you do require that level of protection, say for a different environment, you would use the AP-274 and an Extronics enclosure that is certified for the use of our AP-274 in those kinds of environments. You can contact Extronics directly for more information but here is the data sheet.
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.