Wireless Access

Out of 100 AP's 5 or 6 are not joining secondary controllers in a cluster.
AP shows second controller ip as 0.0.0.0.

All other AP's have both ip's of controllers populated.

any ideas?

------------------------------
Eddie Peterson
------------------------------

Are there any hard set IPs in the provisiong profile for the APs?
Are they in the same AP-Group as other other working APs?
Do you get any output when you run the "show config effective | i ap-name" at the controller levels?

------------------------------
Dustin Burns
Senior Mobility and Access Engineer @WEI

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
If my post was useful accept solution and/or give kudos
------------------------------

Original Message:
Sent: May 17, 2021 03:45 PM
From: Eddie Peterson
Subject: CAP only joining one Controller in a cluster?

Out of 100 AP's 5 or 6 are not joining secondary controllers in a cluster.
AP shows second controller ip as 0.0.0.0.

All other AP's have both ip's of controllers populated.

any ideas?

------------------------------
Eddie Peterson
------------------------------

No set ip's, AP uses DHCP
Yes AP's in same group have both controllers populated
config effective grep on select AP's return nothing

rebooting AP did not fix it.

------------------------------
Eddie Peterson
------------------------------

Original Message:
Sent: May 17, 2021 06:18 PM
From: Dustin Burns
Subject: CAP only joining one Controller in a cluster?

Are there any hard set IPs in the provisiong profile for the APs?
Are they in the same AP-Group as other other working APs?
Do you get any output when you run the "show config effective | i ap-name" at the controller levels?

------------------------------
Dustin Burns
Senior Mobility and Access Engineer @WEI

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
If my post was useful accept solution and/or give kudos

Original Message:
Sent: May 17, 2021 03:45 PM
From: Eddie Peterson
Subject: CAP only joining one Controller in a cluster?

Out of 100 AP's 5 or 6 are not joining secondary controllers in a cluster.
AP shows second controller ip as 0.0.0.0.

All other AP's have both ip's of controllers populated.

any ideas?

------------------------------
Eddie Peterson
------------------------------

What version of ArubaOS is this?  How many APs in the cluster?  How many and what type of controllers in the cluster?

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------

Original Message:
Sent: May 18, 2021 12:47 PM
From: Eddie Peterson
Subject: CAP only joining one Controller in a cluster?

No set ip's, AP uses DHCP
Yes AP's in same group have both controllers populated
config effective grep on select AP's return nothing

rebooting AP did not fix it.

------------------------------
Eddie Peterson

Original Message:
Sent: May 17, 2021 06:18 PM
From: Dustin Burns
Subject: CAP only joining one Controller in a cluster?

Are there any hard set IPs in the provisiong profile for the APs?
Are they in the same AP-Group as other other working APs?
Do you get any output when you run the "show config effective | i ap-name" at the controller levels?

------------------------------
Dustin Burns
Senior Mobility and Access Engineer @WEI

ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
If my post was useful accept solution and/or give kudos

Original Message:
Sent: May 17, 2021 03:45 PM
From: Eddie Peterson
Subject: CAP only joining one Controller in a cluster?

Out of 100 AP's 5 or 6 are not joining secondary controllers in a cluster.
AP shows second controller ip as 0.0.0.0.

All other AP's have both ip's of controllers populated.

any ideas?

------------------------------
Eddie Peterson
------------------------------

VLAN assignment on the port? Different VLAN and or IP Network ?

I mean nothing seems super likely due to all of those 5 or 6 getting the primary controller listed...

Are the primary and secondary controllers on the same network segment? Same VLAN? Same or different switch? etc

------------------------------
Matt
------------------------------

Original Message:
Sent: May 17, 2021 03:45 PM
From: Eddie Peterson
Subject: CAP only joining one Controller in a cluster?

Out of 100 AP's 5 or 6 are not joining secondary controllers in a cluster.
AP shows second controller ip as 0.0.0.0.

All other AP's have both ip's of controllers populated.

any ideas?

------------------------------
Eddie Peterson
------------------------------

Hello,

I have the same problem, in about 1000 AP there are 150 that join only one controller,

I try to belete the whitelit and the AP come up newly with both the tunnels, but now after few day it is retouned to have only one tunnel

what can be done?

------------------------------
Dario Nardello
ACMP ACSP ACCP ACEP
------------------------------

Original Message:
Sent: May 17, 2021 03:45 PM
From: MassiveAirhead
Subject: CAP only joining one Controller in a cluster?

Out of 100 AP's 5 or 6 are not joining secondary controllers in a cluster.
AP shows second controller ip as 0.0.0.0.

All other AP's have both ip's of controllers populated.

any ideas?

------------------------------
Eddie Peterson
------------------------------

What version of ArubaOS are you running?

How many nodes in the cluster?

On each node, SSH into it and run "show lc-cluster load distribution ap"

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

HPE Design and Deploy Guides: https://community.arubanetworks.com/support/migrated-knowledge-base?attachments=&communitykey=dcc83c62-1a3a-4dd8-94dc-92968ea6fff1&pageindex=0&pagesize=12&search=&sort=most_recent&viewtype=card
------------------------------

Original Message:
Sent: Jul 20, 2023 06:12 PM
From: Dario.IT
Subject: CAP only joining one Controller in a cluster?

Hello,

I have the same problem, in about 1000 AP there are 150 that join only one controller,

I try to belete the whitelit and the AP come up newly with both the tunnels, but now after few day it is retouned to have only one tunnel

what can be done?

------------------------------
Dario Nardello
ACMP ACSP ACCP ACEP

Original Message:
Sent: May 17, 2021 03:45 PM
From: MassiveAirhead
Subject: CAP only joining one Controller in a cluster?

Out of 100 AP's 5 or 6 are not joining secondary controllers in a cluster.
AP shows second controller ip as 0.0.0.0.

All other AP's have both ip's of controllers populated.

any ideas?

------------------------------
Eddie Peterson
------------------------------

version 8.10.0.6

------------------------------
Dario Nardello
ACMP ACSP ACCP ACEP
------------------------------

Original Message:
Sent: Jul 20, 2023 06:19 PM
From: cjoseph
Subject: CAP only joining one Controller in a cluster?

What version of ArubaOS are you running?

How many nodes in the cluster?

On each node, SSH into it and run "show lc-cluster load distribution ap"

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

HPE Design and Deploy Guides: https://community.arubanetworks.com/support/migrated-knowledge-base?attachments=&communitykey=dcc83c62-1a3a-4dd8-94dc-92968ea6fff1&pageindex=0&pagesize=12&search=&sort=most_recent&viewtype=card

Original Message:
Sent: Jul 20, 2023 06:12 PM
From: Dario.IT
Subject: CAP only joining one Controller in a cluster?

Hello,

I have the same problem, in about 1000 AP there are 150 that join only one controller,

I try to belete the whitelit and the AP come up newly with both the tunnels, but now after few day it is retouned to have only one tunnel

what can be done?

------------------------------
Dario Nardello
ACMP ACSP ACCP ACEP

Original Message:
Sent: May 17, 2021 03:45 PM
From: MassiveAirhead
Subject: CAP only joining one Controller in a cluster?

Out of 100 AP's 5 or 6 are not joining secondary controllers in a cluster.
AP shows second controller ip as 0.0.0.0.

All other AP's have both ip's of controllers populated.

any ideas?

------------------------------
Eddie Peterson
------------------------------