Wired

last person joined: yesterday 

Settings SNMv3 AOS convert to CX

This thread has been viewed 13 times
  • 1.  Settings SNMv3 AOS convert to CX

    Posted Oct 11, 2021 10:31 PM
    Hi Guys, 

    Seeking your assistance regarding my issue for Aruba CX, i have SNMPv3 working running on AOS (2930M).
    However tried some guideline for SNMPv3 in CX, but no luck. 

    Anyone can convert this working settings of SNMPv3 in AOS to Aruba CX especially the highlighted settings :

    snmp-server location "Test Site"
    snmp-server contact "Tech-OPS"
    snmp-server enable traps snmp-authentication extended

    snmpv3 enable
    snmpv3 user Test.SNMP auth sha XXXXXXX priv des XXXXXXXXX
    snmpv3 group operatorauth user "TEST.SNMP" sec-model ver3

    snmpv3 targetaddress "NMS1" params "all" 1.1.1.1
    snmpv3 targetaddress "NMS2" params "all" 1.1.1.2
    snmpv3 targetaddress "NMS3" params "all" 2.2.2.1
    snmpv3 targetaddress "NMS4" params "all" 2.2.2.2

    Thanks in Advance.