Try >> show ap tech-support ap-name <AP-NAME> | begin "Power Status"
You should see the current power in the first few lines:
------------------------------
Dustin Burns
Lead Mobility Engineer @WEI
ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
If my post was useful accept solution and/or give kudos
------------------------------
Original Message:
Sent: Sep 28, 2021 10:12 AM
From: adam.campbell
Subject: Troubleshooting AP Power Consumption
Hi,
are there any particular CLI commands that will provide information of what power source an access point is receiving on a network?
TIA
------------------------------
adam.campbell
------------------------------