The initial setup dialog starts when you connect a terminal, PC, or laptop running a terminal emulation program to the Serial port on the Policy Manager hardware appliance.
To configure the Policy Manager hardware appliance:
1. Connect the Serial port.
a. Connect the Serial port to a terminal using a null modem cable.
b. Power on the hardware appliance.
The hardware appliance is now available for configuration.
2. Configure the Serial port.
Bit Rate: 9600
Data Bits: 8
Stop Bits: 1
Flow Control: None
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.