can anyone help, I have an issue that I had last year I assumed was fixed but it seems that it may have resolved itself before I could find the issue, but now the problem is back.
SETUP:
We have one IAP (AP535) with an IP of 10.81.67.26 (DHCP Assigned) with a Virtual IP of 10.81.67.250.
We have 3 Networks setup, Staff, Chromebooks, and Guest, the networks Staff and Chromebooks work fine.
Guest if I use no security then guest connects without issue if I apply a Captive portal to the Guest network that is when I start getting issues, on connecting to the Guest network (Vlan 65), It will obtain an IP (10.81.65.26) from the Windows DHCP Server 10.81.16.10, but then will open a URL with the image below.
I assume that because I have set up the Virtual Controller IP that this is what it is attempting to connect to. the client device is unable to ping anything on the network, it can ping it's self 10.81.65.26 but not it's own gateway 10.81.65.1
It has the correct IP, Subnet, and Gateway, it is visible as a connected client in the WebUI with the Role Internal CP, I ass that is because that it has yet to get the captive portal and have the accept box ticked.
I have configured two other networks Visitors and Visitors2 (Visitors - no CP, Personal WPA2) & (Visitors 2- CP Internal Acknowledged) both using the same VLAN (65) Visitors works fine, Visitors2 has the same issue.
------------------------------
Simon Harbinson
------------------------------