Wired Intelligent Edge

 View Only
last person joined: 2 days ago 

Bring performance and reliability to your network with the Aruba Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of the ArubaOS-Switch and ArubaOS-CX devices, and find ways to improve security across your network to bring together a mobile first solution.
Expand all | Collapse all

6300 Link state resets rate anomaly occurred on interface - AP575

This thread has been viewed 4 times
  • 1.  6300 Link state resets rate anomaly occurred on interface - AP575

    Posted Oct 22, 2020 04:27 AM

    Hi,

     

    I've got a couple of AP575 patched into a 6300 switch and I'm seeing the following errors (every few minutes) on the switch on both ports the APs are patched into.

     

    Any ideas? 

    MessageEvent|5511|LOG_WARN|AMM|-|Link state resets rate anomaly occurred on interface 1/1/7: 0.2 resets/sec
    SeverityWarning (Priority: 4)
    Syslog IDhpe-policyd
    Source Time10/22/20 09:17:51 (1603354671079545)
    Sequence #1,611,593,031,464

    #6300


  • 2.  RE: 6300 Link state resets rate anomaly occurred on interface - AP575

    EMPLOYEE
    Posted Oct 22, 2020 11:17 AM

    Greetings!

     

    Could you provide the specific 6300 model and software version it is currently running, along with the software build on the AP575 itself?



  • 3.  RE: 6300 Link state resets rate anomaly occurred on interface - AP575

    Posted Oct 22, 2020 11:57 AM

    JL659A 6300M on FL.10.05.0011

    575 on 8.7.0.0



  • 4.  RE: 6300 Link state resets rate anomaly occurred on interface - AP575

    Posted Oct 23, 2020 04:11 PM

    No 100% sure what happened here but one of the 575s had the same IP as the gateway on the VLAN it was on. I disabled the port that the 575 was on and I believe that resolved the issue. Will need to investigate why it had that address as it obviously shouldn't have been in the DHCP scope.