Hi All,
I've been dealing with setting up the SNMP service for our monitoring system but having this error message:
2021-07-27T09:42:20.880617+0200 systemd-coredump[6262] <CRIT> Event|1201|LOG_CRIT|AMM|-|hpe-snmpd crashed due to signal:11
2021-07-27T09:43:19.789453+0200 systemd-coredump[6332] <CRIT> Event|1201|LOG_CRIT|AMM|-|hpe-snmpd crashed due to signal:11
2021-07-27T09:44:19.796674+0200 systemd-coredump[6405] <CRIT> Event|1201|LOG_CRIT|AMM|-|hpe-snmpd crashed due to signal:11
2021-07-27T09:45:19.657429+0200 systemd-coredump[6476] <CRIT> Event|1201|LOG_CRIT|AMM|-|hpe-snmpd crashed due to signal:11
Our monitoring system managed to reach the switch, however, connection is lost in ~1min after sync. So, it had worked for 1 min until the crash info did not pop up. I tried to reboot the sw but I am still seeing this problem.
For me, the log message says that the snmp daemon stopped working for some reason. I have checked the release note of ver 10.07.0010 but such a problem like this is not mentioned in the document.
sw# show core-dump
==================================================================================================
Daemon Name | Instance ID | Present | Timestamp | Build ID
==================================================================================================
hpe-snmpd 6339 Yes 2021-07-27 09:44:19 c075dcd
hpe-snmpd 6266 Yes 2021-07-27 09:43:19 c075dcd
hpe-snmpd 6233 Yes 2021-07-27 09:42:20 c075dcd
hpe-snmpd 5970 Yes 2021-07-27 09:39:20 c075dcd
hpe-snmpd 5922 Yes 2021-07-27 09:38:48 c075dcd
hpe-snmpd 4005 Yes 2021-07-27 09:09:40 c075dcd
hpe-snmpd 3952 Yes 2021-07-27 09:09:05 c075dcd
hpe-snmpd 3833 Yes 2021-07-27 09:08:25 c075dcd
hpe-snmpd 3763 Yes 2021-07-27 09:07:26 c075dcd
hpe-snmpd 3706 Yes 2021-07-27 09:06:26 c075dcd
==================================================================================================
Total number of core dumps : 10
==================================================================================================
Is it a bug or I missed something? Even if I missed something, I think it is not normal that snmpd does crash after reboot.
Have you guys seen such a problem like this ?
Thanks a million for your help and support on this issue.
Additional info:
-There is no ACL applied under snmp community.
-Community public has been deleted.
-SNMP v2c is being used
sw# sh version
-----------------------------------------------------------------------------
ArubaOS-CX
(c) Copyright 2017-2021 Hewlett Packard Enterprise Development LP
-----------------------------------------------------------------------------
Version : PL.10.07.0010
Build Date : 2021-06-10 00:38:14 UTC
Build ID : ArubaOS-CX:PL.10.07.0010:c075dcdbb1f5:202106100007
------------------------------
Gábor Fejér
------------------------------