Atmosphere 2021

 View Only
last person joined: 18 days ago 

Expand all | Collapse all

Aruba 3810m switches in stack

This thread has been viewed 23 times
  • 1.  Aruba 3810m switches in stack

    Posted Dec 13, 2021 10:08 AM
    Hello guys,

    I have two (aruba-3810m-16sfp) switches stacked with ring topology member 1 status is commander and member 2 status is standby. I've configured the ports 1/16 and 2/16 with the same exact configuration. The problem is when connecting the end device to the port 2/16 the port comes up and the device becomes reachable which is fine. When connecting the same end device using the same DAC cable to the port 1/16 the port comes up but the device is unreachable ! .. any ideas ? I also checked the logs and nothing pointing to this issue.

    Mohammed Bani Salameh

  • 2.  RE: Aruba 3810m switches in stack

    Posted Feb 14, 2022 01:39 PM
    For the 3810M, the recommended topology for stacks of up to 5 members is a mesh; each stack member is connected to every other member to maximize reliability by providing multiple paths for rerouting traffic in the event of a link or chassis failure.

                                                                                                                                                                  K Dealer

    Wendell Schaefer