Hi.How do I clear Alert "Crash files available" on MM (VMC) and 7205 controllers.Found the "tar clean crash" cli-command and run it on MM (VMC) and both of th controller but it do not looks like it dos anything.Does anyone know how to clear this alert?Kind Regards.
Hi Herman.It shows in the top of the screen when I am signing into my MM/VMC.
See the attached picture.
I don't know if time would do something. But it is about 18-20 hours since "tar clean crash" command and the error still shows.Kind Regards.
Strangely enough, time was the answer. Getting close to 24 hours the error now is gone.
That did it. Thanks.
(wlc1) *[mynode] #tar crash(wlc1) [mynode] #tar clean crash(wlc1) [mynode] #
(wlc1) *[mynode] #tar crash
(wlc1) [mynode] #tar clean crash
(wlc1) [mynode] #
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.