Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

VLAN bridge from switch to AP303H AP Eth-2

This thread has been viewed 16 times

  • 1.  VLAN bridge from switch to AP303H AP Eth-2

    Posted Apr 26, 2022 11:31 AM
      |   view attached
    Hi

    anyone can help me to configure VLAN bridge to AP-303H eth2 from switch

    i will explain my situation 

    I have WLC MM with AP-303h . I have to connect my IP-Phone to AP eth2 but the VLAN should be bridge from Switch. As of now the VLAN taken through WLC for IP-Phone , i don't want this setup for AP but all other SSID must be contact WLC to assign VLAN.

    See the attached Diagram 
    #AP303H #Wireless #VLAN #7210 #7220





    ​​​​​​​​​

    ------------------------------
    Swajith lal
    ------------------------------
    ​​


  • 2.  RE: VLAN bridge from switch to AP303H AP Eth-2

    MVP
    Posted Jun 09, 2022 11:59 AM
    Is the enet2 port configured as tunnel or bridge?

    ------------------------------
    Michael Haring
    ------------------------------

    Original Message