Controllerless Networks

 View Only
last person joined: yesterday 

Aruba Instant Wi-Fi: Meet the controllerless Wi-Fi solution that's easy to set-up, is loaded with security and smarts, and won't break your budget.
Expand all | Collapse all

Controller 7005 can use switching mode

Jump to Best Answer
This thread has been viewed 7 times
  • 1.  Controller 7005 can use switching mode

    Posted 10 days ago
    Hi, I'm phoom

    I have a question. I have 2 uplink  VLAN1 : 172.16.1.0/24 , VLAN2 : 172.16.2.0/24 vlan management is 1. both vlan get dhcp from server when I plugin cable to switch VLAN1 can ping gateway of vlan1 but VLAN2 can't ping to gateway vlan2 
    topology in this belw
    Thanks.

    ------------------------------
    Nattaphoom Kangsri
    ------------------------------


  • 2.  RE: Controller 7005 can use switching mode
    Best Answer

    EMPLOYEE
    Posted 10 days ago
    Is the WLC connected to the switch with two separate physical connections, or is it a trunk?  Type "show port status" on the WLC to make sure both interfaces are up and not disabled by spanning tree.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    HPE Design and Deploy Guides: https://community.arubanetworks.com/support/migrated-knowledge-base?attachments=&communitykey=dcc83c62-1a3a-4dd8-94dc-92968ea6fff1&pageindex=0&pagesize=12&search=&sort=most_recent&viewtype=card
    ------------------------------



  • 3.  RE: Controller 7005 can use switching mode

    Posted 5 days ago
    Hi cjoseoh

    i have 2 switch CoreSwitch and Hubswitch  uplink to core is trunk mode and uplink to HubSwitch is access mode i will try your recommend 

    Thank you

    ------------------------------
    Nattaphoom Kangsri
    ------------------------------