Wireless Access

 View Only
last person joined: 20 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.
Expand all | Collapse all

AP-303H-configure IP-TV on Eth-2

This thread has been viewed 12 times
  • 1.  AP-303H-configure IP-TV on Eth-2

    Posted Apr 26, 2022 10:52 AM
      |   view attached
    HI

    Anyone can help me to do the recommended configuration for IP-TV system to work with AP-303H.I just created IP-TV Vlan and wired AP profile in WLC then attached to eth2 profile. now the port is under IP-TV VLAN ( its getting IP for TV NW ) . But my TV is not work Well , its getting stuck every 5-10 mis.

    IGMP snooping enabled on IP-TV VLAN

    When i connect directly to switch its work well ( enable IGMP and query )

    See the attached network diagram for IP-TV system,
    Thanks in advance
    #wireless #AOS-CXSwitchSimulatorLab #AP303H #IPTv #100Series #7210 #7220
    ​​​​​​​​​​​​​​​​​

    ------------------------------
    Swajith lal
    ------------------------------
    ​​​​


  • 2.  RE: AP-303H-configure IP-TV on Eth-2

    MVP
    Posted Jun 09, 2022 12:03 PM
    Is the port for the IP-TV setup as tunnel or bridge? If it's tunnel, the traffic is sent all the way to the controller. When it's bridged, the traffic is as if the RAP is transparent and it gets dumped locally to the switch.

    ------------------------------
    Michael Haring
    ------------------------------