Wireless Access

 View Only
last person joined: 16 hours ago 

Access network design for branch, remote, outdoor and campus locations with Aruba access points, and mobility controllers.

AP 501 tx not communication

This thread has been viewed 4 times
  • 1.  AP 501 tx not communication

    Posted 4 days ago
    Aruba 501 communication is going well and suddenly disconnected.


    There is a phenomenon where communication between AP-504 and bridge equipment is good, but suddenly communication is not possible at some point.


    When I checked the AP-504 port information, it was confirmed that the RX signal was increasing in AP and bridge equipment, but the TX signal was not increasing.


    If there is a case of dealing with the problem, I would like to know the solution.


    Thank you.

    ------------------------------
    Kyung Min Yoo
    ------------------------------