Wired Intelligent Edge

 View Only
last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

100FX-sfp not working with procurve 2810 (j9021A)

This thread has been viewed 0 times

  • 1.  100FX-sfp not working with procurve 2810 (j9021A)

    Posted Dec 19, 2016 01:32 PM

    Hi,

    i have a HP procurve 2810-24g (j9021A) switch. Everything is working fine except one SFP (J9054C). This particular SFP is detected in "show tech transceivers" but the link status stays down. I have allready tested the SFP in another switch and it's working just fine.

    Edit: The switch is running the most recent firmware (N.11.75). 

    Thank you for your help, I really appreciate it.

     


    #SFP


  • 2.  RE: 100FX-sfp not working with procurve 2810 (j9021A)

    MVP GURU
    Posted Dec 19, 2016 03:01 PM

    Just curious: the Switch SFP port on which the HP X111 100M SFP LC FX Transceiver (J9054C) is installed into [*] has the Speed-Duplex setting set to Auto as default? What happens if you force the Speed-Duplex setting to 100-Full instead of Auto (considering the fiber optic link operates 100 Mbps Full Duplex on both ends)?

    [*] HP ProCurve 2810-24G (J9021A) has 4 SFP ports that are "Dual-Personality Ports": this means that each one of those SFP ports can be used as either an RJ-45 10/100/1000 port or an mini-GBIC for use with supported mini-GBIC Transceivers.



  • 3.  RE: 100FX-sfp not working with procurve 2810 (j9021A)

    Posted Dec 20, 2016 11:36 AM

    The default speed and duplex value was "100-full". Setting is to "auto" leads to an error: "Value auto is not applicable to port 23." The link should operate at 100-full. I did also test it at 100-half to no avail.

    Also, the four RJ-45 GbE Ports are not in use.

    Thanks anyway!