We have IRF stack with 3x1950 (JG963A) switches in them. I have all users on default vlan 1. Voice traffic and IP phones are all on vlan2.
The Voice system (Shoretel/mitel Connect) add DSCP markings to the voice traffic with a vault of
DiffServ / ToS byte 184 (DSCP = 0x2e)
How do I enable the switch to observe the incoming QoS markings on vlan 2 voice traffic.
I have read the manuals but they are making no sense to me. I could easily do this on procurve switches via the CLI.
© Copyright 2023 Hewlett Packard Enterprise Development LPAll Rights Reserved.