With two of the 205 AP's (not IAP), I am getting the following when the AP is booting:
Running ADP...cat: /tmp/master: No such file or directory
Done. Master is
killall: nanny: no process killed
killall: sapd: no process killed
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
[ 159.876000] Restarting system.
This isn't happening accross the board with AP's but two of the 5 have done this. I have factory reset the devices and Still nothing.
Here is the full readout from the Console:
APBoot 1.5.3.14 (build 45815)
Built: 2014-09-05 at 11:23:04
Model: AP-20x
CPU: BCM53011/15, revision A0
I2C: ready
SKU: 2
OTP: 0xeca01028
Clock:
CPU: 800 MHz
DDR: 533 MHz
AXI: 400 MHz
APB: 200 MHz
PER: 400 MHz
DRAM: 128 MB
POST1: memory passed
SF: Detected MX25L25635E with page size 4 kB, total 32 MB
Flash: 32 MB
PCIe0: RC, link up
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 14e4 4360 00002 03 08000004 00000000 00000000 00000000
PCIe1: RC, link up
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 14e4 4360 00002 03 40000004 00000000 00000000 00000000
Power: POE
Net: eth0
Radio: bcm43460#0, bcm43460#1
Hit <Enter> to stop autoboot: 0
Checking image @ 0x1e100000
Copying image from 0x1e100000
Image is signed; verifying checksum... passed
Signer Cert OK
Policy Cert OK
RSA signature verified.
Uncompressing... done
[ 0.000000]
[ 0.000000] Aruba Networks
[ 0.000000] ArubaOS Version 6.4.3.9 (build 55230 / label #55230)
[ 0.000000] Built by p4build@lemnos on 2016-05-27 at 13:43:11 PDT (gcc versio n 4.7.2)
[ 0.000000]
[ 0.000000] Flash variant: variant0
[ 0.000000] MPCORE found at 19020000, SCTLR 0x10c53c7f ACTLR 0x00000040 CPSR 0x600001d3 SPSR 0x60000013 PRRR 0x000a81a8 NMRR 0x40e040e0
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 120660k/120660k available, 10412k reserved, 0K highmem
[ 0.050000] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counter s available
[ 3.450000] PMU: registered new PMU device of type 0
[ 3.958000] pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x080fffff]
[ 3.960000] pci 0001:01:00.0: BAR 0: assigned [mem 0x08000000-0x08007fff 64bi t]
[ 3.962000] pci 0001:01:00.0: BAR 0: set to [mem 0x08000000-0x08007fff 64bit] (PCI address [0x8000000-0x8007fff]
[ 4.466000] pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x400fffff]
[ 4.468000] pci 0002:02:00.0: BAR 0: assigned [mem 0x40000000-0x40007fff 64bi t]
[ 4.470000] pci 0002:02:00.0: BAR 0: set to [mem 0x40000000-0x40007fff 64bit] (PCI address [0x40000000-0x40007fff]
[ 4.816000] i2c-springbank: using remapped base c9e5c060
[ 4.820000] mpcore_wdt mpcore_wdt: enabling watchdog.
[ 4.824000] qspi_iproc qspi_iproc.1: 1-lane output, 3-byte address
[ 4.826000] m25p80 spi1.0: mx25l25635e (32768 Kbytes)
[ 4.828000] Creating 1 MTD partitions on "spi1.0":
[ 4.830000] 0x000000000000-0x000002000000 : "qspi"
[ 4.844000]
[ 4.844000] Starting Kernel SHA1 KAT ...Completed Kernel SHA1 KAT
[ 4.848000] Starting Kernel HMAC-SHA1 KAT ...Completed Kernel HMAC-SHA1 KAT
[ 4.908000] Starting Kernel DES KAT ...Completed Kernel DES KAT
[ 4.912000] Starting Kernel AES KAT ...Completed Kernel AES KAT
[ 4.914000]
AP-type has_ble_support: .
Domain Name: arubanetworks.com
No panic info available
[ 13.632000] AP xml model 81, num_radios 2 (jiffies 6816)
[ 13.634000] init_asap_mod: installation:0
[ 13.636000] radio 0: band 1 ant 0 max_ssid 16
[ 13.638000] radio 1: band 0 ant 0 max_ssid 16
Starting watchdog process...
Getting an IP address...
[ 18.018000] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 20.022000] bond0: link up (1000FD)
[ 20.024000] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
192.168.0.151 255.255.255.0 192.168.0.1
Running ADP...cat: /tmp/master: No such file or directory
Done. Master is
killall: nanny: no process killed
killall: sapd: no process killed
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
[ 159.876000] Restarting system.
APBoot 1.5.3.14 (build 45815)
Built: 2014-09-05 at 11:23:04
Model: AP-20x
CPU: BCM53011/15, revision A0
I2C: ready
SKU: 2
OTP: 0xeca01028
Clock:
CPU: 800 MHz
DDR: 533 MHz
AXI: 400 MHz
APB: 200 MHz
PER: 400 MHz
DRAM: 128 MB
POST1: memory passed
SF: Detected MX25L25635E with page size 4 kB, total 32 MB
Flash: 32 MB
PCIe0: RC, link up
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 14e4 4360 00002 03 08000004 00000000 00000000 00000000
PCIe1: RC, link up
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 14e4 4360 00002 03 40000004 00000000 00000000 00000000
Power: POE
Net: eth0
Radio: bcm43460#0, bcm43460#1