I 'm deploying a bunch of 225's and I've run across 4 AP's that won't work at 1 gig on the switch where I have them connected, only at 100 full. When they negotiate at 1 gig, the radios don't function at all. At 100 full, the radios work but ... I'm running at 100.
When I move them to another switch, they work fine so I have to think it's a configuration on the switch.
The catch is, I have other 225's on the same stack and they're fine. I've tried setting negotiation on the switch ports to auto, and 1 gig manual but no dice. The radios only light up at 100 . I have about 100 or so of these puppies to hang so if you have any idea how to resolve this, I'd appreciate it.